New Drywall

Apply primer/sealer with a brush or roller.  (see: Preparing-Priming Walls )This provides a smooth even surface for the wallcovering to adhere to.  Also, it will be easier to remove the wallcovering at a later date.  Note that fresh plaster must be allowed to cure for 90 days before priming.

Previously Painted Walls

Fill cracks or holes with joint compound/spackling.  See: Drywall Damage for any damaged drywall issues.  When dry, sand any rough spots until smooth.  Lightly sand enameled (glossy) surfaces.   Be sure to clean walls with a bleach or ammonia and water solution.  REMEMBER to wipe with clean water afterwards.  Let dry thoroughly, then, apply a primer/sealer to the entire wall surface or over the spackled areas at a minimum.  (see: Preparing-Priming Walls )  This will make the removal of the wallpaper at a later date much easier.

Previously Papered Walls

Remove any old wallcoverings (see:  Remove-Existing Wallpaper) and sand smooth.  Clean walls with a bleach or ammonia and water solution. Again, REMEMBER to wipe with clean water afterwards, and let dry.   Apply a primer/sealer to the wall surface.  (see: Preparing-Priming Walls )  All walls should be sized to maximize the slip. (some primers consist of sizing) This allows for easier positioning of wallcoverings as it is being hung, and makes it easier to remove at a later date.

toll-free 1-877-229-9427 or send us a quote

Company Product Designs Copyright.   All rights reserved